My finished 4th wand

I suggest reading my post about my 4 wands first before

reading this one. The part on how I made this wand to

this point. Ok at this point I used polymer clay glaze

two coats on the leafs scolpy brand. Then I started to paint

the stem part of the rose with a purple water color, because

that's  all I have at the moment. It was kind of heard to do

because water colors don't stick to wood very well. I thickly

dried brushed it on the best I could and touched it up along the

way. Then every wear the stem wasn't I used the paint brush,

and my finger to touch up around the stem. Removing excess

water color. Then I used the same glaze over the purple,

also I mixing the purple water color in with some of the

glaze. It helps to add color because the glaze was, pulling

up the water color in some spots. After all of the purple was

covered with two coats and touched up where needed. I

did the rest of the wand with the same glaze, with a couple

of coats as well. then it was ready to use with in an hour.

and fully cured with in 24 hours.